Superlift’s 2” Lift System for Ford Bronco with the Sasquatch Package is an affordable solution for adding larger tires and increasing ground clearance. This kit does not require new control arms and extension travel is controlled preventing CV bind. Front lift is achieved with strut spacers and an aluminum preload ring. Rear lift is achieved via strut spacer.
2" Lift Kit with Sasquach Package Features:
- Levels the front with the rear of the vehicle.
- Fits 2 and 4 door models.
- Easy bolt-on installation.
- CV Axles do not bind at full extension.
- Increased ground clearance.
- The best customer service and technical help in the industry
| Tire | Wheel | Offset (MM) |
| 35x12.50R17 | 17x9 | 0 to +20 |
Models with OE crash bars can clear 35 x 12.5 tires.
Models without OE crash bars from stock can clear 37 x 12.5 tires.
Additional Information:
- Installation Time: 2-3 Hours
- Difficulty Level 2 of 5
Notes:
- Does NOT fit Bronco Sport models.
- DOES FIT Wildtrack, First Edition, or any model with Sasquatch Package.
- NOT recommended for Base models
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Proposition 65
WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Featured Blog Post: Visit our blog to get the Do’s and Don’ts of Ford Bronco lift kits!
