After years of beating on and evolving this design, we are now able to release the Bronco versions of the M.A.S.S. Storage Components!
Each drawer ships with two dividers. The dividers can be slid into slots evenly spaced throughout the drawer. They can also be more permanently bolted into place with the provided zinc-coated hardware, including nylon lock nuts.
The drawers are modules. They are built to stack on top of each other, providing for a large number of configuration options.
The drawers secure with what we call HD MASS Connectors. You can think of these as installed nuts. Once you install them into your base (platform, top of bottom drawer, etc.) they can stay installed, making the assembly and disassembly of your module stack very easy. The HD Connectors also mean that you do not have to get below the platform to hold a nut. It also means that there is nothing on your platform to ever wear out.
These drawer modules do not require our MASS Platform. They can be used in a universal system. If you are using these in a universal system, you will not need the HD MASS Connectors. If you are attaching these to our Bronco MASS Platform, you will need the HD MASS Connectors.
Interior Dimensions:
- Length: 25.6″ (650mm)
- Width: 18.4″ (467mm)
- Height: 3.9″ (99mm)
Exterior Dimensions
- Length: 27.6″ (701mm) – tip of slide handle to rear face of drawer
- Width: 20.3″ (517mm)
- Height: 5″ (127mm)
