After years of beating on and evolving this design, we are now able to release the Bronco versions of the M.A.S.S. Storage Components!
Built from 5052 aluminum, these drawers are designed to last a lifetime. The 6th Gen Bronco features a large amount of room in the cargo area (as compared to other SUV's). Ford has done a great job of giving us access to all of the storage room possible. Our Bronco MASS drawers take advantage of all of this space. This particular drawer has an interior height of 6″.
These drawers are built with locking (in and out) drawer slides that feature a lifetime manufacturer's warranty. The slides are rated at 500 lbs.
Each drawer ships with two dividers. The dividers can be slid into slots evenly spaced throughout the drawer. They can also be more permanently bolted into place with the provided zinc-coated hardware, including nylon lock nuts.
The drawers are "modules". They are built to stack on top of each other, providing for a large number of configuration options.
The drawers secure with what we call "HD MASS Connectors". You can think of these as installed nuts. Once you install them into your base (platform, top of bottom drawer, etc.) they can stay installed, making the assembly and disassembly of your module stack very easy. The HD Connectors also mean that you do not have to get below the platform to hold a nut. It also means that there is nothing on your platform to ever wear out.
If you are using these in a universal (ie. "custom") system, you will not need the HD MASS Connectors. If you are attaching these to our Bronco MASS Platform, you will need the HD MASS Connectors.
Interior Dimensions:
- Length: 25.4" (645mm)
- Width: 18.4" (467mm)
- Height: 7" (177mm)
Exterior Dimensions
- Length: 27.6" (701mm) - tip of slide handle to rear face of drawer
- Width: 20.3" (517mm)
- Height: 8.4" (213mm)
****Important Powder Coating Note
Powder coating is a manual process done by humans and may take some time. When you purchase powder coated products from AAL, we coat them for your order. Occasionally, that means delays with non-standard colors, resprays for less-than-perfect conditions, etc. We have a very high standard with powder coated products. We will work to get your parts coated in the best condition possible before they leave the building.
Please be advised, choosing to have your products powder coated could add to the delivery time. Please verify before placing your order.
