Ford Bronco Triple Fog Light Brackets by KR Off-Road

Give that Bronco some much needed lighting with these KR Off-Road Triple Fog Light Brackets. There stainless steel brackets are made out of 12 gauge stainless steel right here on Long Island (New York). Powder coated black to ensure a durable finish, these heayv-duty brackets feature multiple mounting positions ensuring your brackets not only stay on the truck, but offer you adjust-ability as well. They will fit most brands of LED Auxiliary lighting.

***Note: The HD Modular Bumper uses a Torx Plus 40 (TP40) socket. Please do not use a Torx 40 (T40) socket (you could strip your bolts). Ford did not provide this bit in your tool set. They only provided a TP30 and TP50 bit. If you'd like to add-on a TP40 bit please click here.

Triple Fog Light Features

• 12 Gauge #304 Stainless Steel
• Bolt-On Installation
• Designed & Manufactured in the USA (Long Island, NY)

Includes:

• 1 Pair of Brackets
• Instructions

Optional Wiring Harness: Add our optional wiring harness which will allow you to connect your Baja Designs or Rigid Industries lights to your OEM upfitters.

• Baja Designs: This harness has 3x Weatherpack (WP) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Baja Designs lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
• Diode Dynamics (3x SS3 without Backlight): This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3 lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
• Diode Dynamics (3x SS3/SSC2 with Backlight): This harness has 3x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3/SSC2 lights with backlight. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SS3/SSC2 back-light control cable (which activates the back-light on all of the SS3/SSC2 lights).
• Diode Dynamics (2x SS3 &1x SSC2): This harness has 2x Deutsch (DT) 2-pin connectors & 1x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 2 pairs of Diode Dynamics SS3 lights & 1 pair of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
• Diode Dynamics (1x SS3 & 2x SSC2): This harness has 1x Deutsch (DT) 2-pin connectors & 2x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 1 pair of Diode Dynamics SS3 lights & 2 pairs of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
• Rigid Industries D-Series: This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Rigid Industries D-Series lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal).
• Rigid Industries Radiance: This harness has 9x (on each side) weatherproof/heat shrinkable wires which terminate onto the Rigid Industries Radiance Light wires. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the Radiance back-light control cable (which activates the back-light on all of the Radiance lights).
• Optional Extension Brackets: These optional brackets will allow you to mount your Baja Designs S2/Squadron lights right-side up (so that the product logo and/lenses are not upside down). With most bracket kits the lights are mounted upside down. This solves that issue. (These will not work with S1 lights however)